Mitsubishi Understands Automation

Mitsubishi video

watch video


EtherNet/IPTM Scanner for the iQ Platform

The EIP4CCPU allows the iQ Platform to talk with other EtherNet/IPTM connected third party CPUs such as ControlLogix or CompactLogix.  It can share data and directly control Ethernet/IP distributed devices such as I/O (Block or Point) Drives and other devices.

Ethernet/IP modules more information The scanner is configured using the EIP4CCPU Scanner Configuration Utility (a free utility that can be downloaded on meau.com). The EIP4CCPU Scanner Configuration Utility discovers and configures the network settings of a scanner regardless of its network parameters, making it very easy to setup a  new module or reconfigure an existing module. The scanner communicates with Ethernet/IP devices using the Ethernet/IP communication protocol and supports initiation of both Class 1 I/O and Class 3 Explicit Messaging connections.

Ethernet/IP press release >

manual >


L Series more information L Series
compact modular controller

The rack-free design promotes high system flexibility with minimum form factor. 


GX Works2 Software

GX Works2 more information GX Works2 is the next generation configuration and programming software for FX and Q Series controllers. 


MR-J4 Servo System

MR-J4 more information Integrated motion control solutions that work perfectly together.

more >

Robots Microsite

Mitsubishi has created a website, www.MitsubishiRobotics.com, for our full line of robots and their applications.

Robot Microsite Robot Microsite

The website is a hub of information about robotic solutions for customers in diverse industries engaged in a variety of processes.


MES Interface IT

download brochure Part of Mitsubishi Electric’s e-F@ctory concept, the MES Interface IT bridges the traditional gap between the factory and office by enabling bi-directional data communication from the production floor to enterprise IT systems.

Eliminating all middleware and gateway PCs, the MES Interface IT controller-level direct database access provides users with the leanest solution possible, reducing overhead costs as well as points of failure. Easy and reliable data access across all networked control systems creates limitless application possibilities, from quality control to logistics management.
MESInterface IT














Mitsubishi FR-F800 VFD Catalog







Request a Quote






























Mitsubishi logo Mitsubishi Home Page Mitsubishi Electric

Mitsubishi Electric Automation, Inc., is part of a $40 billion global company serving a wide variety of industrial markets with a family of automation products including programmable logic controllers, variable frequency drives, operator interfaces, motion control systems and servo amplifiers and motors.

PLCs FX Series PLCs Automation Platforms Programmable Logic Controllers

Mitsubishi offers Automation Platforms including modular PLCs to multi-disipline PACs.  The L Series is a powerful but compact modular controller with many features built-in to the CPU itself. The rack-free design promotes high system flexibility with minimum form factor.   The iQ Platform unifies all of the Mitsubishi Electric automation disciplines into a one-of-a-kind modular Programmable Automation Controller (PAC).

Mitsubishi Automation Platforms

MELSEC iQ-F Series - FX5U

Mitsubishi FX5U MELSEC iQ-F PLCDesigned on the concepts of outstanding performance, superior drive control and user centric programming, Mitsubishi's F Series has been reborn as the MELSEC iQ-F Series.

From stand alone use to networked system applications, MELSEC iQ-F Series brings your business to the next level of industry, offering enhanced high speed bus, expanded built-in functions, advanced SSCNETIII/H support and improved engineering environment. Program and parameters are set with the GXWorks3 engineering software.

The FX5U gives the FX a performance boost and adds features that set benchmark standards for compact PLCs. It enables users to develop more complex and sophisticated automation systems, as well as higher performance applications, without having to migrate to a larger and more costly PLC family. 

The FX5UC NEW spring clamp terminals hold wires in place with constant force, preventing wires from falling out due to vibration. There is no need for crimp terminals or crimp tools saving time. Detachable terminals eliminate the need for rewiring when replacing the module.

The FX5U offers simple connection options to a wide range of automation equipment, including Mitsubishi Electric servos and inverters, Cognex vision systems, networks and energy meters, with reduced wiring effort and no additional programming.

Positioning Control
The FX5U includes Mitsubishi Electric´s Simple Motion Unit as an intelligent function module, providing the ability to perform sophisticated motion control for up to 4 axes. Functions include linear interpolation, circular interpolation, positioning control, synchronized control, encoder following and electronic cam.

Mitsubishi FX5U Series PLC

HMI more information
HMI Operator Interface Terminals

Mitsubishi offers three families of HMI products.The GOT1000 platform is an all new and evolutionary family of high performance Graphical Operator Terminals (GOT).

The F900 GOT Series of Graphical Operator Terminals(GOT) is a cost-effective line of touch screen displays feature widescreen and hand-held options.  The E1000 Series is an all new family of high performance, high functionality and flexible panel-mount HMI terminals. This family of terminals offers a comprehensive list of features and functions to uniquely bridge the gap between high-end SCADA systems and dedicated HMIs.

Mitsubishi HMIs

Mitsubishi MR-J4 Servo SystemServo Motion Control

The MELSERVO MR-J4 servo-motion systems offer users the platform to build the next generation machines that require the J-series’ hallmark superior performance mingled with industry operational safety trends, all the while saving users costly energy and precious real-estate. For our valued existing users, the MELSERVO MR-J4 servo motor and amplifier products will be a drop-in replacement for the MR-J3 series products.

With a wide range of models and options, match your individual application needs with ease and comfort.

Servo Motion

Mitsubishi Variable Frequency Drives VFD Family Brochure Variable Frequency Drives

Mitsubishi offer a wide range of Variable Frequency Drives, from the cost-cost effective variable speed control solution for general purpose applications to the the A700,a high performance drive that features many of the special technologies originally developed for Mitsubishi Electric servo drive products, such as adaptive auto-tuning that automatically compensates for changes in load inertia.

Built to optimize 3-phase motor control, the result is smoother operation, less downtime and ultimately, lower operating costs. Control modes include Velocity, Torque and Positioning, delivering outstanding performance for a wide rande of demanding loads and virtually all general purpose applications.

Variable Frequency Drives

RobotsMitsubishi Robot more information

Mitsubishi Electric’s line of MELFA robots covers a wide spectrum of configurations and capacities that are ideal for small to medium robot applications.  Available in 4, 5, or 6 axis configurations, all units come standard with an impressive list of features and utilities that simplify design and commissioning. MELFA 64 bit RISC processor controllers are compact but robust with great flexibility and communication options. The programming software is very comprehensive in its abilities including, simulation, CAD to program conversion, diagnosis and monitoring.



SCARA Robot learn more Our horizontally articulated RH (SCARA) robots range from 350mm to 1000mm in reach and can handle up to 20Kg payload. The RH series is an excellent choice for high speed material handing, packaging, and assembly. Leading acceleration, speeds, settling time, and rigidity allow the RH to handle high throughput applications.

High speed SCARAs, with payloads of up to 20kg provide the capacity required, while multiple protection ratings including IP65 and ISO class 3 provide maximum protection. Available in both stand-alone "D" and "Q" iQ PLC based versions.


Mitsubishi Home Page >>>

FR-F800 Variable Frequency Drive

Mitsubishi FR-F800 VFDEnhanced Energy Saving Inverter
The low-voltage F800 is specifically designed and optimized for HVAC applications, including air handlers, cooling towers, and pumps.
While it was designed with the HVAC industry in mind, the multi-functional F800 is appropriate for any motor control application that demands increased motor efficiency and maximum energy savings. The F800 controls and supports multiple motor types, including AC induction and permanent magnet motors, eliminating the need to specify multiple VFDs to address various motor control needs. It is available in 200- and 400-volt classes.

Because they’re multi-functional and can be used across various applications and motor types, the F800 is a smart solution for the differing needs of OEMs, electrical contractors, systems integrators, and design and engineering consultants.

download catalog


MR-J4 DC Servo

The ultra-compact MR-J4 DC servo motor with the flange size of 25 mm × 25 mm is suitable for small machines and machine heads. Servo amplifiers with SSCNET III/H interface, general-purpose interface, and the built-in positioning function are available to satisfy demands for a wide variety of applications. The high-performance servo amplifier enables shorter tact time.

The HG-AK_(B)-S100 servo motor with a vertical encoder cable lead is now available. Therefore, servo motors can be selected with the encoder cable leading direction either horizontal or vertical, as well as with/without electromagnetic brake.

download MR-J4 DC Servo brochure

MR-J4-TM Servo Controller with EtherCAT®

Mitsubishi MR-J4-TM EtherCAT Servo ControllerEven when a control system is specified by the end user, the choice of servo drives is frequently left to the OEM.  Now we can offer state-of-the-art servo performance.

Mitsubishi Electric introduces state-of-the-art servo performance with Advanced Vibration Suppression Control II™, One-Touch Auto-Tuning™, and incredible reliability with an EtherCAT® interface for use with custom PC based control systems or competitor’s EtherCAT motion systems. The MR-J4-TM Multi-Network Servo Drive with EtherCAT combines the industry-leading performance, features, and reliability of the MR-J4 Series servo system with an EtherCAT interface for customers where custom PC based control systems or competitor’s EtherCAT controllers are specified.

MR-J4-TM Servo Controller


PowerGate 66 IP66/NEMA 4 Variable Frequency Drive

powergate 66 more information The PowerGate 66 IP66 / NEMA 4 variable frequency drive (VFD) is Mitsubishi’s introduction to the decentralized drive market.

The stand-alone VFD is an engineered solution incorporating a version of the Mitsubishi Electric E700 VFD into a custom made NEMA 4 (water resistant) enclosure allowing the drive to be placed closer to the motor even in harsh environments.

The PowerGate 66 drive is especially suitable for applications that require precise motor speed control, including conveyors used in food and beverage operations and material handling, and the control of pumps and fans in HVAC and water handling applications, or in any application where the drive is exposed to water and dust.

Beyond its decentralized design, advantages of the PowerGate 66 include its unique keypad and display. The LCD displays information in words, rather than number-based codes, as is the industry norm. And to simplify programming, the keypad has10 buttons laid out similarly to a pocket calculator.

more information


MC Works64 Advanced SCADA Featuring 3D Graphics

Mitsubishi MC Works64 more information MC Works64 is a powerful, 64-bit, Web-enabled, OPC HMI/SCADA suite. MC Works64 takes full advantage of the convergence of 64-bit-based computing machinery, the release of new Microsoft operating systems (Windows 7, 8, Windows Vista and Windows Server 2008) and the growing customer demand for engaging three-dimensional graphic visualization of business processes.

MC Works64 is an advanced 64-bit OS compatible SCADA equipped with 3D graphics screen. MC Works64 features the MC AppBuilder engineering tool to realize easy collaboration between the SCADA and programmable controller. Implement MC Works64 for monitoring and control including functions such as HMI screens, trends and alarms, and for engineering to support aspects from monitoring to control.

more information

GOT Simple HMI

Mitsubishi GOT Simple HMI more information The new range of GS HMIs from Mitsubishi Electric are a cost-effective series offering a simple and flexible entry-level option for newcomers to the world of machine visualization.  Besides all the standard basic functions, it also includes additional ones such as data logging, FA transparent mode and operator authentication.

The FA transparent function allows access to automation components such as PLCs, frequency inverters and servo amplifiers within a system via the HMI. This enables data from connected components to be viewed and parameters or other settings to be adjusted from a central location.*These 7" and 10" panels share a common specification apart from the size of the display.

more information


RV-F Large Capacity 6-Axis Robots

RV-F Robot and controllerMitsubishi Electric Automation, Inc. introduces the latest in its line of RV-F Series 6-axis robots in 35, 50 and 70 kg payloads.

These new robots extend the Mitsubishi Electric RV-F Series product line to address applications that require higher payloads and longer reaches, including CNC machine tending, large material handling and assembly applications. The new RV-35F, RV-50F, and RV-70F robots are especially well suited to the automotive, food and beverage, as well as electronic manufacturing industries.

RV-F Large Capacity 6-Axis Robots


MELSEC iQ-R Automation Controller

iQ-R Automation ControllerThe New Mitsubishi iQ-R series CPU offers dramatic improvements in performance, setting new benchmark standards for processing speed. This not only enables users to realise enhanced system designs, but also provides the basis for significant reduction in hardware costs. At the same time, the iQ-R series offers reductions in development cost, maintenance cost and risk of system failure, while providing an innovative upgrade path that will enable users to take advantage of ongoing developments through software upgrades rather than hardware upgrades.

Internal Database
The CPU includes an internal database that can be installed into the SD memory card. This allows a selection of database commands that can add/ delete/change records to be utilized for simple recipe functions. It is also easy to import/export Unicode files for use in spreadsheets. This is useful where multiple product variations are produced using the same machine process.

High Speed and Synchronization
The iQ-R boasts a high speed system bus for synchronized data communications between multiple CPUs. This improves performance and accuracy, especially for high speed motion control applications.

Enhanced Security Features
iQ-R has a variety of security features to protect intellectual property and plant safety. Engineers can restrict access at the network level using IP filtering, lowering the risk of hacking or any other unauthorized third party access. At the controller level, security key authentication prevents unauthorized access to the program or execution of the CPU.


iQ-R Automation Controller

Facebook Facebbok Linkedin LinekdIn Twitter Twitter YouTube RR Floody YouTube Channel Wordpress Our Blog

Chamber of Commerce